BY Jim Vance
Running with power is a new technology that seeks to provide more accurate metrics for runners and triathletes. For those that are interested in running with power, Coach Jim Vance has some simple tips to help you get started.
If you are now currently using a power meter for running, like the new Stryd or RPM2 products, you likely are wondering how you can utilize the tool to maximize the benefit of the technology in your training and racing. Power meters for running are a very new technology, and there is still a lot to learn ahead. However, to begin using it effectively to learn about your training and training response, you should begin as you would if you were using a cycling power meter.
Collecting Data
The first thing you should be doing is simply performing your normal training and observe the data as you train. Track the data and see how the numbers fluctuate or correlate with different intensities, different inclines or declines, and more. Don’t try to control your training based on the power numbers, as you don’t have a baseline for what they truly mean yet. At first, collect the data from your normal training and see how the numbers are trending.
Testing
When you feel you are ready, you can then test for your run Functional Threshold Power (FTP). Now, if you’re a triathlete who uses power on the bike, this number will not likely be the same as on the bike for you. In fact, it is likely larger than your cycling FTP. So don’t try to use that value. Be specific and set your run functional threshold for power, or what I call, rFTPw. If you’re a runner, you likely already use threshold pace in TrainingPeaks, or what I call rFTPa. I use these terms so not to confuse them with cycling, and especially not to confuse both pace and power when comparing or discussing FTP.
How to Test
The next question is how can you find your rFTPw? There are a number of ways you can estimate your rFTPw, but I will share one of the field tests you can do. One of the power meter companies, Stryd, came up with a test that I like, and I modified slightly. It is much easier than an all-out 1 hour effort, or even 20 to 30 minute effort. It simply is a 3 minute all-out effort and a 9 minute all-out effort separated by 30 minutes. This test should be performed outside on a flat surface, not on a treadmill. Here’s the protocol:
Warm up for 15 minutes, preparing for hard effort at the end of it
Conduct a 3 minute interval at maximal effort
Recover with 5 minute walk, 10 minute easy jog, 5 minute walk, and 5 minute easy jog, and 5 minute walk again, (30 minutes total)
Conduct a 9 minute interval at maximal effort
Cool down 10 to 15 minutes easy
After you have completed this test, take the average power for the 3 minutes and the 9 minutes, and average the two values. For example, if you did 350 watts for the 3 minutes, and 300 for the 9 minutes, you would get a 325 average of the two.
Next, take 90 percent of that value, which is within about +/-3 percent of your actual value if you paced the efforts correctly, as all-out. So the 325 average, would be an estimated rFTPw of 293 watts.
Setting Your Zones
Next, you simply need to go into your zones in athlete settings, and set that value for Run Power. It is critical you NOT change the “Default Power” value, if you use a power meter on your bike, and want those files not to be affected. If you’ve been using your bike FTP as the only value for power when uploading running power files, your Intensity Factor® (IF®) and Training Stress Score® (TSS®) values are likely way off, so this should help quite a bit.
Why You Should Not Yet Set Run Power Zones
If you’ve done this before with cycling, your habit is likely to then set zones. My advice is NOT to set zones at first. No, you don’t have to set them, and not having them it won’t affect things negatively. The current available zones, while excellent for cycling, don’t apply with run power meters. Trust me, I have researched it, and I will be coming out with my running power zones in another post soon, that work effectively for you. In the meantime, just gather some data and see how your Variability Index®(VI®), IF, and TSS values calculate based on easy efforts, hard efforts, and everything in between.
Changing Workout Type
It is also possible that with this new technology for running, hardware hasn’t caught up effectively yet, so the power files might only be uploaded as a bike file. You’ll need to go back and change the files from a bike to a run file, and then make sure the Run Power setting, rFTPw, actually applies. If you don’t recalculate the data from the power file, it won’t change just because you change it from a bike to run, you must recalculate.